TO HIRE A SPIEGELTENT
Spiegeltents are well proven structures that are simple to erect and dismantle.  However, there are some basic requirements that you should be aware of before proceeding with an enquiry.

In normal circumstances Spiegeltents can be erected in one to two days and dismantled in one.  They are free standing structures and can be erected on tarmac, concrete, lawns and any firm surface. They cannot be erected on soft or wet ground.

There should be sufficient space to allow for the footprint of the structure and adequate external access for fire safety requirements. In normal circumstances a clear open space of no less than 24m diameter will be needed.  The ground on which they are erected needs to be flat, however a slight incline – a slope of 30cm over 20m - can be accommodated.

Erecting a Spiegeltent is labour intensive. It is delivered in an articulated truck. The truck needs to unload within 2 metres of the erection site. If truck access is not possible further labour charges will be incurred. The truck measures 16m in length, 2.55m in width, 4m in height and weighs up to 35 tons.

Spiegeltents are supplied with period internal lighting. The Hirer must supply a 32 amp 3 phase RCD/RCB protected power supply. You would be responsible for connecting and testing supply.

Spiegeltents are not supplied with emergency house lighting, fire exit signs, fire extinguishers, disabled access ramps or steps to entrances if the slope of ground requires the provision of higher steps.

Spiegeltents are supplied with a bar for serving drinks. These bars do not have sinks, water supplies, waste systems or coolers.

We will be happy to undertake a site visit and will advise the client on all aspects of installation, capacity, seating arrangements, staging and maintenance of the structure. Please be aware that capacity figures are advisory only. It is the Hirers responsibility to ascertain and regulate fire capacity after consultation with local fire officers or safety representatives.